The socket board has a screw and socket for the bulb to place and a pull chain to switch on or switch off the light according to your needs. Then take the socket board, which has the same circular drills as the shelves had- and fit them on the top of the screws. Once again we will be placing the long screws in each rod’s holes. Take another set of four rods and tighten them on the long screws on the final shelf. Step 2: Making Arrangements To Hold The Bulb Now take the final shelf and fit the pre-drilled holes on each corner into the long screws peeking out of the long poles. Take another four rods and attach them to each of the four screws on each corner of the shelf.īy now your shelf would have started to take shape.Īgain, we are going to take the long screws and fit them at the end of each long pole in order to attach the next shelf (the lightest one).
Once the shelf is placed, there is enough space left to fit the next set of four poles into the screw. The shelf has small circular hole areas on each corner to hold the rods tightly. This will make a perfect space for our first shelf (weight capacity of 5 pounds) to be fitted on top of our four rods tightly. Now place the plastic base (the heaviest and thickest one) piece in front of you on any flat surface and then adjust the four short screws on all the corners.Įach pole has a hole in the bottom, which has to be tightly fastened to the screws you have placed on the base piece.įor the next step, we will be placing the long screws into the ends of these long rods. To assemble the bottom and the shelves, you start with taking the thick plastic base piece and the long poles, as well as the short screws along with the long screws.
Assemble target shelf lamp how to#
How to Assemble Threshold Floor Lamp with Shelves? Step 1: Building The Shelf Stand
3 has a weight limit of 15 pounds.Ĭoming to the first step, you have to take out all the items very cautiously from the box and take off the plastic coverings. 2 can hold a weight of 5 pounds and the last shelf, shelf no. The Threshold floor lamp comes with 3 shelves and supports a 100-watt bulb to brighten up your room.Īll the three shelves have different load-bearing capacities depending on their respective weights and thickness shelf no. So, we have eased down the whole procedure for you to make your life easier and to save your time. If you have purchased a stylish contemporary Threshold floor lamp with shelves to illuminate your living room then you would surely be fretting over ways to assemble it just the right way.
0 kommentar(er)
